It is used in inlet and outlet of MV lines up to 36 Kv. It has voltage indicator and disconnector with SF6gas. It can be used with motor and MID(malfunction indicator device). It provides to on-off the opening energy.
Content
Busbar: copper units that connect the equipment to each other.
Load Break Switch (switch disconnector); medium-voltage switchgear devices that are capable of opening and closing under load . Active parts of them has been made from epoxy resin and MV switchgear devices located into the hopper within the SF6 gas filled with a sealed pressure system. There are 3 position; open, close and earthing. Earthing switch in the SF6 gas has the ability of closing on by-pass.
Earthing switch: Provides connection between electrical circuits that are not under tension and earth. It is air-insulated.
Voltage indicators: lighting panel of the capacitive voltage indicator showed that there is any energy on the cable connection point in cubicle is on side of front of the cubicle.
Heater : ıt prevents to occur moisture drying the air.
Sizes
|
Incoming/outgoing cubicle with load break switch
|
Width
|
Depth
|
Height
|
|
36kV
|
750mm
|
1400mm
|
2250mm
|
|
6 – 12 – 17,5 – 24 kV
|
375-500mm
|
840-960mm
|
1600-1800mm
|
