It is used to measure clearly. It is inserted on the previous one of the desired location.
Content
Busbar: copper units that connect the equipment to each other.
Load Break Switch(switch disconnector); Medium-voltage switchgear devices that are capable of opening and closing under load . Active parts of them has been made from epoxy resin and MV switchgear devices located into the hopper within the SF6 gas filled with a sealed pressure system. There are 3 position; open, close and earthing. Earthing switch in the SF6 gas has the ability of closing on by-pass.
Earthing switch: Provides connection between electrical circuits that are not under tension and earth. It is air-insulated.
Current Transformer: It reduces to the desired value for the purpose of protection or measuring the current of the busbar. It is used as epoxy resin or set of LPCT. Its ends are not left open.
Voltage transformer: It reduces to the desired value for the purpose of protection or measuring the voltage of the busbar. It is epoxy resinous.
Heater : It prevents to occur moisture drying the air.
Fuse: It is used for purpose of protection.
Sizes
|
Current voltage measurement cubicle
|
Width
|
Depth
|
Height
|
|
36kV
|
1000mm
|
1400mm
|
2250mm
|
|
6 - 12 - 17,5 - 24 kV
|
750mm
|
840mm
|
1600mm
|
